Wednesday, May 12, 2010

Finishing Touches for Blog Submission 2 :)


http://www.ent.iastate.edu/images/plantpath/soybean/topdieback/topdiebackleaves.jpg

Ok here is my final aim: to investigate the effects different quantity's of water have on a plant's growth and health.

And i've also included a picture of dieback which occurs in both under and over watered plants- a healthy plant shouldn't have it. as you can see at the edge of the leaf, the green is turning brown and yellow and crinkling up and dieing. This is what i have to look out for in the under and over watered plants because it is the earliest sign that somethings not right with the plant :) just thought i'd include a picture so everyone knows what im talking about when i refer to dieback

Close Up




I couldnt get a clear shot of my climate graph so ive included this close up for the temperature part as it came out blurry becuase my camera suks :(

Climate Graphs




My climate graphs- i included a close up of the other two cause i couldn't get a clear picture so yeh thats only to be cautious :)

Tuesday, May 11, 2010

Plan of Action

So I’m starting my experiment today – I no I’ve left this late but I just couldn’t make up my mind on a suitable project. From here I’m going to aim to blog 3 times a week at least and update photo!
I have palnted all my raddish seeds and have begun watering!!

The experiment has officially started!

Monday, May 10, 2010

Some background resarch WHAT TO EXPECT!!! hopefully..

Hey again! So I’ve done some research into what I should expect from my experiment. I’ve researched the effects of water on plants and why its so important for them as well as what plants require to be healthy and all that sort of stuff but I don’t know if I should include that background information on here???

Well here’s what I’m expecting should my experiment go to plan. The 1st plant is being under watered. The 2nd just right and the third over watered. these are some extracts from the some of the sites i used that are relevant to what happens if the water balance is out and how i will be able to tell this is happening:

If there is not enough entry of water in a plant, the nutrients it needs cannot travel through the plant.

If a plant’s soil has too much water, the roots can rot, and the plant can’t get enough oxygen from the soil. A plant cannot grow if it doesn’t have healthy roots, so the proper balance of water is key when growing plants.

One of the quickest ways is to just put your finger in the soil, up to your knuckle. If the soil is moist, it has enough water; if it is dry, you need to water the plant. If the pot feels lighter than usual, or if the soil is pulling away from the sides of the pot, it needs more water.
- http://www.gardeningknowhow.com/children-in-the-garden/how-does-water-affect-plant-growth.htm

Over-watering is the most common cause of death in indoor plants. If the roots of a plant are surrounded by water, they cannot absorb oxygen. Does a plant need water or oxygen to survive? It needs both, so over-watering kills the plant by rotting the roots and preventing the plant from absorbing much needed oxygen

http://www.gardeningknowhow.com/how-to-water-a-plant.htm

Signs a plant is not getting enough water:
• Yellowing leaves or dried leaves toward the bottom of the plant. – too little water for a plant makes it conserve what little water it has by keeping the stalk green and the roots moist, but the leaves will turn yellow and wilt and eventually dry up.
• Start showing some root at the surface. The ground around the plants will be cracked, and you can be assured that your plant roots are not getting the moisture or nutrients they need to grow properly.
• The plant will eventually die.

http://www.gardeningknowhow.com/problems/under-watering.htm

The signs for an overwatered plant are:
• Lower leaves are yellow
• Plant looks wilted
• Roots will be rotting or stunted
• No new growth
• Young leaves will turn brown
• Soil will appear green (which is algae)
• The signs of plants affected by too much water are very similar to plants that have too little water


The reason plants affected by too much water is that plants need to breath. They breath through their roots and when there is too much water, the roots cannot take in gases. It is actually slowly suffocating when there is too much water for a plant

http://www.gardeningknowhow.com/problems/signs-of-plants-affected-by-too-much-water.htm

I also asked a guy working at flower power who explained the earliest signs of over watering will be dieback on the tips of the leaves.

Referencing; the methods behind my method

I used a number of methods to make up my own final one.
I based my method of planting radish seeds on this method from Garden Action
http://www.gardenaction.co.uk/fruit_veg_diary/fruit_veg_mini_project_june_1_radish.asp
However I had to modify it so that instead of sewing the seeds in a vegetable garden I planted them in pots. I also got a few facts about growing radishes which lead me to chose to grow them.

I used http://www.horticulturist.com/How%20to%20do%20things/watering.htm to make sure my directions for watering a plant were accurate- I know that sounds ridiculous but I had to find a more accurate was of saying pour water on the plants.

I also used the site: http://compost.css.cornell.edu/plantgrowth.html as a guide to create my own method but adjusted the variables mainly so that water became the independent variable.

After examining many more experiments it was mainly the 3 above I used to help me. Although I adjusted the above methods, mine is largely my own as I had to create the most appropriate method possible for my specific experiment.

Sunday, May 2, 2010

How the Amount of Water Effects Plant Growth:

Hypothesis: Water increases a plant’s growth until a certain point.
Aim: To investigate if the effects of water on plant are always positive.

Equipment:
• 1 Packet of radish seeds
• 3 small plastic plant pots
• Soil
• A watering can
• Water
• Light source (sunlight)

Method:
1. Set up your 3 pots at a place outside which a) is out of the way of constant movement e.g. not in the middle of a verandah, so that they will not have to be moved and are safe from animals, b) receives an adequate amount of sunlight (allowing all 3 pots equal sunlight) and c) sheltered from strong winds
2. Fill the pots with soil up to 2 inch below the rim. Make sure that all pots are using the same soil and are filled equally.
3. Sprinkle the radish seeds thinly and evenly on top of the soil across the 3 pots.
4. Cover these seeds with an inch of soil across each of the pots. The soil level should now be 1 inch below the top of each pot.
5. Pour water in to the first pot so that half the soil is moist. *
6. Pour water into the 2nd pot until all the soil is moist and a little water comes out at the bottom. * Note: When you are watching for the water to come out of the bottom of the pot to show that all the soil is moist, be sure that it is not running down a space between the soil and the pot. If so, water a little, then wait for the soil to swell back to fill the pot.
7. Pour water into the third pot until water is flowing out of the bottom. *
8. Leave the plant alone so that the water can sink through.
9. Repeat steps 5-8 three times a day.
10. Construct a results table.
11. Record all observations about the plant and its growth in the results table on a daily basis. The observations should include the number of seeds that have germinated, plant height and observations about plant health such as color, the plant stability and condition of leaves. The number and size of leaves should also be monitored.
12. Keep all the pots in the same setting to minimize any variation in temperature, lighting, and other environmental factors, i.e. do not move the plants from their original position to maintain the controlled variables.

*It is important to add the water to the pot slowly so that it can properly soak into the soil.
** This is a draft aim and hypothesis, I still need to work on them I think x)

Discussion of Method:
The independent variable in this experiment is the amount of water used.
The dependent variables are the plants growth and health.
There are also many controlled variables such as the radish seeds, the type and amount of soil, the sunlight and temperature.

The 3 plants are in the same place all within 50 cm of each other. This is to control the amount of sunlight reaching the plants and the temperature each plant is in as controlled and constant as possible.

All three plants have been planted in the same soil which limits variation and ensures equality.

I have also chosen to use seedlings instead of young plants to enforce further control over the experiment. The problem with buying 3 pre planted plants for this experiment is that you have no control or much knowledge really before they were in your possession. So, I would have had no control on the amount of water and sunlight each had received prior to buying them or over the variation in how each had been grown. Also the plants may have been planted at different times meaning one is older than another and they may have suffered from a disease that I wouldn’t know about which could cause variation in the experiment.

I chose radish seeds because they grow quickly and thrive in cooler weather. They are also very well suited to containers as well as in the ground and very few disease effect radishes in their short growth cycle.